Technovit Provil BLACK Is a self-mixed silicone, with very low viscosity and excellent mobility. Because to to special material characteristics. Very strong coloring and associated high contrast enable accurate optical measurements even in very fine structures (e. g. etched microstructures).

Technovit Provil BLACK Does not have any reaction with other reagents and can be used for almost any type of surface impression, regardless of the material of the object. The resulting indentation can be evaluated under the microscope or by laser and roughness measurement equipment.

Technovit Provil Light Is a free-flowing silicone and is therefore well suited for forming difficult geometries. Using a mixing gun, the silicone was evenly extruded from the two chambers of the twin cylinder through a mixing sleeve. Thus, Technovit Provil Light is directly applied to objects in the form of beads without bubbles. Additional mixed casing accessories can be used to fill small chambers (drilled or similar).

Technovit Provil Light Accurate 3D replica of surface impressions. It has the highest impression accuracy, such as etched microstructure can be visualized (500:1); no harmful substances, suitable for all fields; no temperature change during curing, no negative impact on the surface characteristics of objects; low process cost, no equipment investment, less time expenditure; multiple evaluation and application possibilities.

Technovit Provil Putty / Putty Soft is the impression silicone gel that can be kneaded by hand. It is easy to handle, fast curing and easy removal from the sample without leaving residues. The impression can be stabilized when a larger area must be taken, in difficult to enter places or working overhead.

Combining Technovit Provil Light and Putty is perfect: the lowest shrinkage and the highest level of detail.