application area
usage method
Technovit Blue LED: Light polymerisation lamp, mobile, handy, easy to use with standard batteries. Many application methods of the Technovit 2200 series are not to be solved in the laboratory but on-site.
application area
 | Technovit Blue LED Blue light flashlight is used for applications of light curing Technovit products (polymerization), especially in the field of mobile metallographic and ceramic surface repair. The shell is made of anodic aluminum oxide, and the light source is a 1-watt high-performance LED with continuous power control at 465 nm wavelength (blue light). |
usage method
 | Place the Technovit Blue LED blue light flashlight at a maximum of 1 cm above the applied Technovit product and turn it on. Polymerization time was performed between 40-60 seconds, depending on the product. The light cone was kept as small as possible to avoid radiation loss. |
Technical data, Technovit Blue LED
parameter type | data |
supply voltage | 2 AA cells (1.5 volts each), LR6 (alkaline) |
LED voltage / LED power | About 3.3 volts / 350 mA |
Light output / wavelength | Approximately 300 mW / 460nm, + -20nm |
LED life span | About 1,000 hours |
Housing dimensions / weight | 26 x 170 mm / approximately 70 g |
Temperature range for storage and transportation | -10 C to + 40 C |
humidity | And 35-95% relative humidity |
atmospheric pressure | 500-1060 hPa |
Provide free metallographic experimental solutions； Expert guidance for installation and use； Principle of 2-hour after-sales response； Provide maintenance services and spare parts support.
Provide free metallographic experimental solutions； Expert guidance for installation and use； Principle of 2-hour after-sales response； Provide maintenance services and spare parts support.
Provide free metallographic experimental solutions； Expert guidance for installation and use； Principle of 2-hour after-sales response； Provide maintenance services and spare parts support.
13390834960
400-800-5586
623@pschina.com.cn
TOP
400-800-5586 
