400-800-5586
Home / Equipment+ / Cutting Machine
Cutting machine CUTLAM®micro 1.1
Cutting machine CUTLAM®micro 1.1
Cutting machine CUTLAM®micro 1.1

Precision cutting

Stable operation

safety device

The CUTLAM®micro 1.1 is a LAM PLAN laboratory micro-cutting machine.Easy to use and economical. It is designed for precision cuts of the most sensitive materials.

Telephone 400-800-5586

Precision cutting

精密切割.jpg

The CUTLAMmicro 1.1 allows you to include a versatile and robust machine in your laboratory at a reasonable budget.Its speed range and cutting chamber capacity will enable you to use it for many applications with a variety of cutting wheels(diamond,AL203,etc.)up to 150 mm diameter.

Stable operation

运行稳定.jpg

The work piece is held by a vice-holding, the knob, located outside of the cutting chamber, which permits a micro metric movement of the Z-axis.

safety device

安全装置.jpg

The cutting feed is controlled with a sliding weight system,allowing you to fine-tune the load applied for delicate and slow cuts.



Real data
  • Selection Guide
  • Data download

Technical data CUTLAM Micro 1.1 

parameter type

data

The diameter of the cutting wheel can be used

And 75- -150 mm

diameter of axle Ø

12.7 mm

Cutting wheel fastening flange diameter

50 MM

The arm was shifted laterally

Travel 25 mm (precision 0.02 mm)

speed

Variable, ranging from 50 to 1,500 rpm

protect

Clear cover with the locking system

Host power and distribution requirements

0.18kW, 230V / 50Hz (three-phase + ground)

Wide x high x deep

390 x 390 x 340mm (Cover open: 630mm)

weight

25KG


Related products
Excellence High Performance Cut-Off Wheels

Excellence cut-off wheels - faster cuts without heating in the highest quality. Perfect for higher turning speeds. For optimal cuts with the greatest precision. Due to the low temperature development, no damage to the material structure.
Precision Cut-Off Wheels

Developed for very fine, precise cuttings the precision cut-off wheels withstand very high demands over a long period of time produce and reduce all subsequent processing steps to a minimum.
Cut the coolant series

LAMPLAN Cutting coolant series is concentrated coolant, when use should be miscible with water. It has good lubrication and cooling effect, avoiding overheating, so that the microstructure of the metallographic material is not damaged during the cutting p
Full service
The team is dedicated to serving you

Provide free metallographic experimental solutions； Expert guidance for installation and use； Principle of 2-hour after-sales response； Provide maintenance services and spare parts support.

contact us
The team is dedicated to serving you

Provide free metallographic experimental solutions； Expert guidance for installation and use； Principle of 2-hour after-sales response； Provide maintenance services and spare parts support.

contact us
The team is dedicated to serving you

Provide free metallographic experimental solutions； Expert guidance for installation and use； Principle of 2-hour after-sales response； Provide maintenance services and spare parts support.

contact us
Contact Us
  • 13390834960
  • 400-800-5586
  • 623@pschina.com.cn
Scan and consult immediately

TOP