complete consumption – no mixing residues

variable pot time, as polymerization is only initiated by using blue light

low polymerization temperature of approx. 90 °C approx. 50 °C also achievable with the irradiation programs

alcohol and acid resistant

SEM-ready

no bubble formation – highly transparent

non-dangerous goods

Technovit 2000 Inside Cure is a special additive that enables the polymerization of Technovit 2000 LC in shadow areas or on the inside of the sample (porous materials, inner areas of pipe sections, etc.).

Properties and application

much wider range of applications, as it is suitable for all

sample types for infiltration of porous samples

same application as a standard product – no change to work processes, documentation, etc. flawless mixing

add the complete bottle of Inside Cure to the bottle of Technovit 2000 LC Liquid, shake – ready; all application parameters remain unchanged

The light-curing Technovit 2000 LC Fixing Paste is used for positioning the samples in the embedding form. It can be modelled like modelling clay and ground and polished after hardening. Due to its high hardness, the fixing paste is also ideally suited as edge protection. Perfect positioning aid also for all other embedding systems with the aid of the Technovit Blue LED.

The Technovit 2000 LC Covering Varnish is used to prevent a dispersion layer on the reverse side of the sample so that a crystal-clear, hard and dry surface is created after polymerization has completed. It is applied to the sample in a layer a few millimetres thick after half the polymerization time. Sample markings can also be securely affixed in this way.