Thin thickness and less thermal damage
High elasticity and long service life
Good compatibility, full varieties
Guide for the application of efficient cutting grinding wheels
Excellence cut-off wheels - faster cuts without heating in the highest quality. Perfect for higher turning speeds. For optimal cuts with the greatest precision. Due to the low temperature development, no damage to the material structure.
High elasticity and long service life
 | Due to the high grade adhesive, efficient cutting wheel on the basis of the thickness of thin still maintains the characteristics of good elastic impact resistance ability, which can be very good response to cut all kinds of material need different into the knife load requirements, cutting wheel skid and blasting phenomenon less, longer effective service life, in the speed of 10004000 have very good cutting performance. |
Good compatibility, full varieties
 | It can be applied in various types of metallographic sample wet grinding wheel cutting machine, equipped with silicon carbide, alumina (domestic called corundum) material, can adapt to different metallographic sample cutting needs. |
Guide for the application of efficient cutting grinding wheels
 | With the three available versions, EXCELLENCE H1, H2, and H4, any type of metal material can be cut. |
Technical data for efficient cutting of grinding wheel (10 pieces / box)
Product Name | Type | Dim. (mm) |
Cut-off wheels H1 EXCELLENCE (Al2O3) | Soft/ semi-hard metals | 250 x 32 x 1,5 300 x 32 x 2 350 x 32 x 2,5 400 x 32 x 3 |
Cut-off wheels H2 EXCELLENCE (Al203) | Treated metals Special metals | 250 x 32 x 1,5 300 x 32 x 2 350 x 32 x 2,5 400 x 32 x 3 |
Cut-off wheels H4 EXCELLENCE (SIC) | Non ferrous materials Casting | 250 x 32 x 1,5 300 x 32 x 2 350 x 32 x 2,5 400 x 32 x 3 |
Cutting in the application of small knowledge
1. A larger flange can better support the large cutting wheel to cope with a harder cutting material or reduce the cutting slope of the cutting soft material due to elasticity. Replacing the flange needs to consider the impact on the cutting ability: cutting diameter = (cutter diameter-flange diameter) / 2.
2. Using cutting coolant can effectively reduce the thermal damage and improve the cutting efficiency of cutting: coolant is by adjusting the proportion of water and lubricant to obtain different cooling lubrication ability, adjustable ratio between 1:25 to 1:10, when cutting material soft or heat sensitive material can appropriately increase the proportion of water, to get better cooling effect, when cutting hard material into the knife speed is slow, can increase the proportion of lubricant appropriately to get better lubrication effect.
3. Preparation method of cutting coolant: all the cutting coolant on the market is concentrated, which must be the order of adding water before adding concentrate and stirring evenly. This order determines the suspension structure of water wrapped in oil, so as to effectively adapt to the needs of cooling before lubrication in the cutting process.
Provide free metallographic experimental solutions； Expert guidance for installation and use； Principle of 2-hour after-sales response； Provide maintenance services and spare parts support.
Provide free metallographic experimental solutions； Expert guidance for installation and use； Principle of 2-hour after-sales response； Provide maintenance services and spare parts support.
Provide free metallographic experimental solutions； Expert guidance for installation and use； Principle of 2-hour after-sales response； Provide maintenance services and spare parts support.
13390834960
400-800-5586
623@pschina.com.cn
TOP
400-800-5586 
