Extend the life of cutter pieces and instruments

Excellent filtration

Environmental friendly

LAMPLAN Cutting coolant series is concentrated coolant, when use should be miscible with water. It has good lubrication and cooling effect, avoiding overheating, so that the microstructure of the metallographic material is not damaged during the cutting p

clean cut

High elasticity and long service life

Good compatibility, full varieties

Guide for the application of precision cutting wheels

Developed for very fine, precise cuttings the precision cut-off wheels withstand very high demands over a long period of time produce and reduce all subsequent processing steps to a minimum.

Thin thickness and less thermal damage

High elasticity and long service life

Good compatibility, full varieties

Guide for the application of efficient cutting grinding wheels

Excellence cut-off wheels - faster cuts without heating in the highest quality. Perfect for higher turning speeds. For optimal cuts with the greatest precision. Due to the low temperature development, no damage to the material structure.

Complete varieties, suitable for all application fields

Does not contain hazardous substances

Strong liquidity

Short curing time

Technovit Brands include a large number of different technical polymers, which are developed mainly for the purpose of testing materials. In addition to traditional materials science applications, Technovit products are used in industrial production proc

Universal, glass-fibre-filled hot embedding resin (Technotherm 2000)

Conductive hot embedding resin (Technotherm 3000)

Transparent, fast melting, hot embedding resin (Technotherm 4000)

Technotherm 2000 is a glass-fibre-filled hot embedding resin with optimum form filling behaviour and minimal gap formation.Technotherm 3000 is the conductive material of the Technotherm line.Technotherm 4000 is a highly transparent, hot embedding resin.

fast and crystal-clear embeddings

easy application without material losses

The low viscosity enable sample stabilization

Technovit 2021 LC FAST – fast and easy application, crystal-clear results. Technovit 2021 LC FAST is an odourless, light-curing, 1-component resin for transparent mountings based on high-molecular special monomers. Technovit 2021 LC FAST is for fast, crys

complete consumption – no mixing residues

variable pot time, as polymerization is only initiated by using blue light

alcohol and acid resistant

Technovit 2000 LC for delicate, temperature-sensitive samples Technovit 2000 LC is an easy to use, 1-component resin, ideal for target preparations in microelectronics and the embedding of polymer materials. The polymerization is carried out under blue li

The curing temperature is controllable, minimum 50℃

Wide range of compatible materials

Controlling the operation time

Technovit Light curing resin has 2000LC and 2021LC, is easy to use single component resin, very suitable for target preparation in the field of microelectronics, and the embedding of polymer materials. The polymerization was performed under blue light in

M-type single-crystal diamond polishing solution

P-type polycrystalline diamond polishing fluid

Emulsion-type diamond final throw-out polishing solution

Bio DIAMANT Series water-based environmental polishing solution follows the strict European REACH standards, achieve zero organic emission (VOC-Free) and biological friendly, very suitable for sample making laboratories, no need for special emission treat

Back adhesive type polished cloth

Start a flat surface

End reach smooth observation surface

The TOUCHLAM® cloths & pads are available in all standard diameters in two fixation modes: self-adhesive and magnetic.

High grinding efficiency

The sample preparation process is reproducible

Improve the efficiency of sample preparation

High flatness

The purpose of sample grinding in the metallographic sample is to remove the deformation layer and achieve a smooth and smooth observation surface, removing the deformation layer commonly known as thin, usually achieved by sandpaper. For high hardness sam

Technovit Provil BLACK

Technovit Provil Light

Technovit Provil Putty/Putty Soft

The Technovit impression silicone series can be used with the dispensing gun, double cylinder and mixed casing. This series of impressions has the characteristics of wide application scenarios, simple use conditions and convenient application.

Advantages and characteristics

usage scenario

Practical skills

Technovit 3040 Impress resin is a classic work of indirect surface detection. Imprinting form has high accuracy, stable size, easy disassembly and good evaluability. The flexibility of the hybrid components ensures pouring and stamping in hard-to-reach, v

Advantages and characteristics

usage scenario

Dynamic gold lithographic solutions

Technovit 2200 series: Microstructure imprints for surface analysis, quality assurance, easy handling, fast curing with blue light.